Save Your Cable Terminals From External Force With Cable Termination Kits

When you are establishing an industrial plant, there are many systems that you need to install to make your plant working. These systems work in a harmonic manner to deliver the maximum potential and efficiency of the plant. You need to take good care while installing all the systems of your industrial unit so that you don’t have to face any major problem while you start it.

One of the basic and most important systems in any industrial plant is the electrical system of the plant. The electrical system of any unit is solely responsible for providing proper and regular power supply to all the machines and keep them running. If your electrical system is not in good and working state, you cannot expect your unit to run continuously and productively.

Save Your Cable Terminals From External Force With Cable Termination Kits

For best state of your industrial electrical system, you need to keep in mind that you have to install only the best quality electrical components to your electrical system, which have right load bearing capacities and are able to work under harsh and stressful working conditions. Good quality electrical products are also necessary for safety purposes, as in industries, we deal with thousands of volts of electricity, which can be dangerous if not handled properly.

A major electrical component that is used in electrical systems is cable termination kits, which are used for better protection of the cable terminals, which are formed for better protection of the high voltage cable terminals formed during installation. The cable terminals, if left opened can be damaged due to various factors like moisture, winds, mechanical stress and chemical contact.

Compaq offers you a wide range of cable termination kits, which are designed to serve a wide range of requirements of different clients. Compaq offers both cold shrink and heat shrinkable cable termination kits, which make them suitable for both indoor and outdoor application. The working range of the Compaq cable termination kits is also very wide and starts from 11Kv and goes up to 72Kv.

Some technical information about Compaq cable termination kits are discussed below.

Text Description Requirement GTP Value
12KV 24KV 36KV
A.C Voltage withstand test ( Dry ) 5 minutes at 4.5 U0 35KV 58KV 86KV
A.C Voltage Withstand test (Wet) 1 minutes at 4.5 U0 30KV 51KV 76KV
D.C Voltage Withstand test 15 minutes at 4 U0 48KV 96KV 144KV
Partial discharge test 10 Pc Max. at 1.73 U0 <5 Pc up to 12.7 KV <5 Pc up to  25 KV <5 Pc up to 33 KV
Impulse Voltage withstand test 10 impulse each polarity at 75KV 95KV 125KV 170KV
Thermal Short Circuit (Screen) Two short circuit &  no visible deterioration Even confirm to more straight condition
Thermal Short Circuit ( Conductor ) Two short circuit & no visible deterioration Even confirm to more straight condition
Dynamic Short Circuit One short circuit & no visible deterioration Even confirm to more straight condition
Humidity Test 300 hours at 1.25 U0 Passes
Salt Fog Test 100 hours at 1.25 U0 Passes

With a wide range of high quality products, Compaq has become one of the prime electrical solutions providers for many clients in India and well as abroad.

Author’s Bio: The author is an electrical engineer and loves to write technical articles for compaqinternational about heat shrinkable termination kits. His job is to provide useful information about various products to the customers through his articles.